The AT1 transmitter is designed to attach to the LT5 level gauge. Main functions are 4 to 20mA analogue output and alarm contact output.
Standard products
Technical excellence
Simplicity
Specialized products
Technical excellence
Simplicity
Variable
| FLEX selections | Technical excellence | Simplicity |
|---|---|---|
Fundamental selection Meet your basic measurement needs |
Technical excellence
|
Simplicity
|
Lean selection Handle your core processes easily |
Technical excellence
|
Simplicity
|
Extended selection Optimize your processes with innovative technologies |
Technical excellence
|
Simplicity
|
Xpert selection Master your most challenging applications |
Technical excellence
|
Simplicity
Variable |
Transmission of the tank level by analogue signals
Max. 6 alarm contact outputs
Easy maintenance due to simple mechanism
Ambient temperature: -20 to +60°C (-4 to +140°F)
AT1 analog transmitter is designed to be installed to the LT, and LTC
series float level gauge. One of the main functions of the transmitter
is to transmit the level gauge’s signals into voltage, electric current,
and resistance output signals.
Because this model has a variety of output signal types, it has an
extensive connection compatibility with various level setting devices.
In addition, the alarm and adjustment contact signals are equipped with
up to six points, enabling the operator to direct the valves andpumps
with this transmitter alone.
AT1 analog transmitter is designed to be installed onto LT and LTC
series level gauging systems. The device transmits the level information
into electric current, voltage, and resistance signals. It can also be
equipped with a maximum of six alarm contact signals.
In addition to transmitting the level, contact signals can be received
by this transmitter alone, enabling easy control ofthevalve and pump.
Tank Gauging
Система коммерческого и оперативного учета продуктов
в резервуарных парках.
Tank gauging
Product Code: AT1-
Region/Country: Japan
Approval Agency: TIIS
Product Code: AT1-
Region/Country: Japan
Approval Agency: TIIS
Product Code: AT1-
Region/Country: Japan
Approval Agency: TIIS
O-ring, Large terminal box, AT5 body,CR
Size: D120mm, d3.5mm. Material: CR. Part: terminal box, large. Usage: AT1/500, B3-11, DRM9700, DU/R, MPC2, TGM5, TMD1.
O-ring, terminal box, small, CR
Size: D100mm, d3mm. Material: CR (Chloroprene Rubber). Part: terminal box, small. Usage: AT1/AT500, DRM9700, DU, NRR261/NRR263, NMT539 Converter, TGM5.
O-ring, El-compartment, large
Size: D196mm, d7mm. Material: CR (Chloroprene Rubber). Part: main body cover, AT1/AT500, B3-11. Usage: AT1, AT500, B3-11.
O-ring, LT/transmitter coupling
Size: D60mm, d3.5m. Material: CR (Chloroprene Rubber). Part: LT-coupling. Usage: AT1/AT500, DU, DUR, TMD1.
Cover, terminal box
Short terminal box cover. Color: silver. Material: aluminium casting. Usage: AT1/AT500, DRM9700, MPC, balancer, TMD1.
Large-short cover, main body
Short main mody cover. Color: silver. Material: aluminium casting. Usage: AT1/AT500, B3-11.
Cover, terminal box, large
Large terminal box cover. Color: silver. Material: aluminium casting. Usage: AT1/AT500, DUR, MPC, TMD1, B3-11.
Potentiometer, CPP45, LT, LTC2230/40
Type: CPP45-RK with R: 500 ohm. For LT series, LTC2230/LTC2240. Usage: AT1.
Potentiometer, CPP45, LTC2110
Type: CPP45-RK with R: 500 ohm. For LTC2110. Usage: AT1.
Main shaft assembly, AT1
Stud bolt M10x40L,spr.washer,washer,4set
For transmitter fitting. Usage: AT1.
Coupling, transmitter, LT11/LT12
ADC, with nut, M4, washer, O-ring. Stud,M10x37/17x10L,nut,M10, 4x washer. Usage: AT1, AT500.
Coupling, male,for gauge head, MP/HP
Gauge head side,male pin type,Alu plate without female coupling for transmitter with washer M4 SUS304,nut M4 SUS304. Usage: LT5, LT14/LT16, LT34/LT36.
Dial Plate AT1
Gear Panel Assembly AT1
Alarm Assembly AT1
Please select your market / region
