Try searching by key words, order- or product code or serial number e.g. “CM442” or “Technical information”
Enter at least 2 characters to start the search.
WirelessHART Adapter SWA70 add-on interface module

WirelessHART Adapter SWA70

Smart WirelessHART interface module with power supply for field devices

SWA70
please wait
Loading price
Prices temporarily unavailable
Price on request
from CHF ??.-
  • Measuring principle

    WirelessHART

  • Function

    Intelligent WirelessHART interface module for connection to 4...20 mA/HART devices

  • Certification

    Non-hazardous area
    ATEX, CSA, IEC Ex, JPN Ex

  • Input

    One point-to-point with a HART device, or
    One point-to-point connection with a 4...20 mA device, or
    Up to four HART field devices connected in multidrop mode if a wide range power unit is used.

  • Output

    WirelessHART communication interface
    Transmission rate: Nominal 250 kBits/s
    Operating frequency: 2.4 GHz (ISM band)
    Transmission range under reference conditions:
    Outdoor 250 m, indoor 50 m

  • Auxiliary power supply / Loop power supply

    Special long live Lithium Thionylchloride battery pack
    24-230V AC/DC external power
    DC power unit

  • Dimensions (wxhxd)

    W x H x D: 111.5 mm x 189.9 mm x 92.8 mm
    Dimensions in mm 25.4 mm = 1 inch

  • Software

    Internal software for controlling, powering, and reading from 4…20 mA/HART field devices

  • Operation

    Integral via Pushbutton, PC configuration via DTM and FieldCare or DD

  • Display

    Integral via 3 LEDs

  • Operating Voltage

    Special long live Lithium Thionylchloride battery pack
    For versions with electronically regulated power supply:
    Wide-range power supply: 24 V...230 V AC/DC ± 10%, 50/60 Hz
    DC power unit: 8 V...50 V DC ± 10%
    In the event of an external power supply failure, wireless communication is maintained for at least one hour by means of an internal supply.

Configure to download the CAD drawings of this product

Please select your market / region