
Tổng quan về thông số kỹ thuật
-
Accuracy
+/- 5 cm
-
Process temperature
-20°C ... +230°C
(-4°F ... 446°F) -
Process pressure absolute / max. overpressure limit
0.8 ... 3 bar
(11.6psi...43.5psi) -
Max. measurement distance
70m (230ft)
-
Main wetted parts
Aluminium, Steel, Stainless steel
Phạm vi ứng dụng
Silopilot FMM50 is an electromechanical level system. Depending on the sensing weight, the level can be measured in bins or silos with dusty, fine-grained or coarse-grained bulk solids or in tanks with liquids.
For level measurement in bunkers or silos for dusty, fine or coarse-grained bulk products, or in tanks containing liquids.
Process connection: Flange
Temperature: -40 to +230°C (-40 to +446°F)
Pressure: 0.8 to 3bar (11.6 to 43.5psi)
Measuring range: 70m (230ft)
Accuracy: ±5cm (1.97")
International explosion protection certificates
Lợi ích
High reliability level measurement of powdery, fine-grained or coarse-grained bulk solids
Safe measurements in extremely dusty environments
Fully electronic digital minimum fail-safe control, therefore no running down of the sensor weight into the silo outlet and no risk to the conveying systems
Quick menu-guided local operation using a 4-line text display
High performance three-phase engine (traction power up to 500N) using a single-phase supply voltage by employment of a converter, therefore simple electric supply
Optional design with certification for application in areas subject to dust explosion hazard zones 20, 21 and 22 (measuring zone) or zones 21 and 22 (device zone), category 1/2D
Lựa chọn Extended
-
Sản phẩm cao cấp
- Chức năng cao và tiện lợi
Công nghệ vượt trội
Đơn giản

-
Sản phẩm chuyên dụng
- Dành cho các ứng dụng đòi hỏi cao
Công nghệ vượt trội
Đơn giản
Có thể thay đổi
Lựa chọn FLEX | Công nghệ vượt trội | Đơn giản |
---|---|---|
Lựa chọn Fundamental Đáp ứng nhu cầu đo lường cơ bản |
Công nghệ vượt trội
|
Đơn giản
|
Lựa chọn Lean Xử lý dễ dàng các quy trình cốt lõi |
Công nghệ vượt trội
|
Đơn giản
|
Lựa chọn Extended Tối ưu hóa quy trình bằng công nghệ tiên tiến |
Công nghệ vượt trội
|
Đơn giản
|
Lựa chọn Xpert Làm chủ các ứng dụng khó khăn nhất |
Công nghệ vượt trội
|
Đơn giản
Có thể thay đổi |
Sản phẩm cũ
-
Measuring principle
Electromechanical
-
Characteristic / Application
Not affected by characteristics of solid medium
Mesuring range: 70m -
Specialities
Switch to indicate need of maintenance (predictive maintenance)
-
Supply / Communication
180 ... 253 V, 50/60 Hz
-
Accuracy
+/- 5 cm
-
Ambient temperature
-40°C ... +70°C
(-40°F ... 158°F) -
Process temperature
-20°C ... +230°C
(-4°F ... 446°F) -
Process pressure absolute / max. overpressure limit
0.8 ... 3 bar
(11.6psi...43.5psi) -
Main wetted parts
Aluminium, Steel, Stainless steel
-
Process connection
Flange DN100 PN16 / 4"
-
Blocking distance
Top: 500 mm (20 ")
-
Max. measurement distance
70m (230ft)
-
Communication
0/4...20 mA
-
Certificates / Approvals
ATEX
-
Design approvals
EN10204-3.1
Định cấu hình để tải xuống các bản vẽ CAD của sản phẩm này
-
-
further parts
Elect.
-