Hãy thử tìm kiếm theo từ khóa, đơn hàng hoặc mã sản phẩm hoặc số sê-ri, ví dụ: “CM442” hoặc “Thông tin kỹ thuật”
Nhập ít nhất 2 ký tự để bắt đầu tìm kiếm.
  • Lịch sử
Cleanfit CPA472D - Retractable assembly for harsh process conditions

Manual or automatic retractable assembly Cleanfit CPA472D

Heavy-duty assembly for chemical and power industries

CPA472D
Please Wait (spinning wheel)
Đang tải giá
Giá tạm thời không có sẵn
Price on request
from CHF ??.-
Lọc phép đo / Tác vụ ứng dụng
Nhiệm vụ đo / Ứng dụng

Định cấu hình để tải xuống các bản vẽ CAD của sản phẩm này

  • Measuring principle

    Potentiometric

  • Application

    Chemical industry, biodiesel plants, power plants, plant design, tanks, process vats or pipes

  • Installation

    Retractable holder

  • Characteristic

    For tanks and process vats and pipelines or pipes (min. DN80)
    The robust retractable assembly permits replacement of the electrode while the tank is full or under process conditions with pressures of up to 6 bar

  • Design

    Manual or pneumatical

  • Material

    Electrode holder, rinse chamber and raised face:
    PEEK, PVDF, conductive PVDF, Alloy C22, stainless steel 1.4571
    Seals: EPDM, FPM (Viton) or FFKM (Kalrez®)

  • Dimension

    Immersion depth: 146 or 280 mm (5.75 or 7.87 inch)

  • Process temperature

    0 to 140 °C (32 to 284 °F)

  • Process pressure

    0 to max. 4 bar (0 to max. 58 psi) overpressure for manual actuation
    0 to 10 bar (0 to 145 psi) overpressure for pneumatic actuation

  • Connection

    Process connections: Flange DN 50, DN 80, ANSI 2", JIS IS10K50A, internal thread G1¼

  • Measuring principle

    Sensor ORP / Redox

  • Application

    Chemical industry, biodiesel plants, power plants, plant design, tanks, process vats or pipes

  • Installation

    Retractable holder

  • Characteristic

    For tanks and process vats and pipelines or pipes (min. DN80)
    The robust retractable assembly permits replacement of the electrode while the tank is full or under process conditions with pressures of up to 6 bar

  • Design

    Manual or pneumatical

  • Material

    Electrode holder, rinse chamber and raised face:
    PEEK, PVDF, conductive PVDF, Alloy C22, stainless steel 1.4571
    Seals: EPDM, FPM (Viton) or FFKM (Kalrez®)

  • Dimension

    Immersion depth: 146 or 280 mm (5.75 or 7.87 inch)

  • Process temperature

    0 to 140 °C (32 to 284 °F)

  • Process pressure

    0 to max. 4 bar (0 to max. 58 psi) overpressure for manual actuation
    0 to 10 bar (0 to 145 psi) overpressure for pneumatic actuation

  • Connection

    Process connections: Flange DN 50, DN 80, ANSI 2", JIS IS10K50A, internal thread G1¼