Promag 23H
This product is no longer available.
Please check new generation in the section predecessor / successor or contact your local Endress+Hauser entity.
Documents / Manuals / Software
-
Proline Promag 23H
Technical Information
Electromagnetic Flow Measuring System (two-wire, loop-powered) for
measuring the flow of conductive fluids in hygiene, food and beverage or
process applications.Technical Information (TI) -
Proline Promag 23
HART
Operating Instructions
Electromagnetic Flow Measuring System (Two-wire, loop-powered) for
measuring the flow rate of conductive fluids. The description ofthe
device functions are in a separate documentation.Operating Instruction (BA) -
Proline Promag 23
HART
Description of Device
Functions
Description of the device functions (options and inputs). Additional
documentation for Operating Instructions PROline Promag 23.Operating Instruction (BA) -
Proline Promag 23
Brief Operating Instructions
Electromagnetic Flow Measuring System (two-wire, loop-powered)
Short Instruction (KA)11/10English -
Distance sleeves in plastic process connections, sensor nominal diameter
DIN DN 25 and ANSI 1"
Installation Instructions
Promag 10 H, 23 H, 50 H, 53 H, 55 H
Installation Instructions (EA) -
Replacing the transmitter
Installation Instructions
Promag 10, 23, 50, 53, 55
Installation Instructions (EA) -
Replacing S-DAT
Installation Instructions
Promag 23, 50, 51, 53, 55, Promass 40, 80, 83, 84, 8ME, 8WF, Cubemass
DCI 8CN, CNGmass DCI 8DF, t-mass 65Installation Instructions (EA) -
Replacing T-DAT
Installation Instructions
Promag 23, 53, 55, Promass 83, 84, 8WF, 8ME, Cubemass DCI 8CN, CNGmass
DCI 8DF, Prosonic Flow 91, 93, t-mass 65Installation Instructions (EA) -
Transmitter parts
Promag 23
Installation Instructions
Installation Instructions (EA) -
Interface parts
Installation Instructions
Promag 10, 23, 50, 51, 53, 55, 400, 800
Installation Instructions (EA) -
Replacing cover and O-ring
Installation Instructions
romag 10, 23, 50, 51, 53, 55, 400, 800, Promass 40, 80, 83, 84, 8ME,
CNGmass 8FF, LPGmass 8FE, Cubemass 8CM, Prosonic Flow 90, 91,9
2, 93, t-mass 65, Prowirl 72, 73Installation Instructions (EA) -
Proline Promag 23
Division 1
Ex documentation
Ex-Dokumentation zur Betriebsanleitung BA045D, BA050D.
Ex documentation for the operating instruction BA045D, BA050D.
Documentation Ex relative à la mise en service BA045D, BA050D.Ex Safety Instructions (XA) -
Proline Promag 23
ATEX II2G
Ex documentation
Ex-Dokumentation zur Betriebsanleitung BA045D, BA050D.
Ex documentation for the operating instruction BA045D, BA050D.
Documentation Ex relative à la mise en service BA045D, BA050D.Ex Safety Instructions (XA) -
Proline Promag 23
ATEX II3G
Ex documentation
Ex-Dokumentation zur Betriebsanleitung BA045D, BA050D.
Ex documentation for the operating instruction BA045D, BA050D.
Documentation Ex relative à la mise en service BA045D, BA050D.Ex Safety Instructions (XA) -
Proline Promag H
Mounting existing process connections on new sensors
Special documentation
Electromagnetic flow measuring system
Special Documentation (SD) -
Change of Directives
Special Documentation
Change of Directives
Special Documentation (SD) -
Proline Promag 10, 23, 50, 51, 53, 55
Information on the PED
Special Documentation
Electromagnetic flowmeter
Special Documentation (SD) -
Proline Promag H, Sonderdokumentation Special
documentation, Documentation special
Wichtiger Hinweis zum Dichtungsset Promag H, Important
Information concerning this Seals Set Promag H, Information
important concernant ce set de joint Promag H.Special Documentation (SD) -
Proline Promag 23
Manufacturer information regarding software
updates (NE 53)
New software version:
Promag 23 HART: 2.02.01 (DE/EN) / 2.03.01
(FR/IT)Manufacturer Information (MI) -
Proline Promag 23
Manufacturer information regarding software
updates (NE 53)
New software version:
Promag 23 HART: 2.02.03 (DE/EN) / 2.03.03
(FR/IT)Manufacturer Information (MI) -
Proline Promag 23
Manufacturer information regarding software
updates (NE 53)
New software version:
Promag 23 HART: 2.02.02 (DE/EN) / 2.03.02
(FR/IT)Manufacturer Information (MI) -
Zasilanie przepływomierzy- art CE 11_2011
Dwuprzewodowe zasilanie urządzeń obiektowych oznacza, że
dostarczenie energii zasilającej oraz transmisja sygnału pomiarowego
są realizowane tymi samymi, dwoma przewodami.
Popularna infrastruktura kablowa dla większości urządzeń
pomiarowych, jak przetworniki ciśnienia, temperatury czy poziomu.Publications (PU)03/12Polish -
Dairy application: CIP unit, Application 1
Meas. point 1: flow measurement CIP-feed
Industry Solutions (SO)English -
Brewery application: Brewhouse, Application 15
Meas. Point 13: flow measurement mash filter
Industry Solutions (SO)English -
Brewery application: Filling, Application 5
Meas. point 5: flow measurement filler
Industry Solutions (SO)English -
Brewery application: Wort Cooler, Application 1
Meas. point 1: flow measurement wort
Application 1: MagmeterIndustry Solutions (SO)English -
Juice application: Raw juice, Application 1
Meas. point 1: flow measurement raw juice
Industry Solutions (SO)English -
Dairy application: UHT unit, Application 3
Meas. point 2: flow measurement at the UHT
Industry Solutions (SO)English -
Dairy application: Butter processing, Application 6
Meas. point 4: flow measurement of salt solution
Industry Solutions (SO)English -
Dairy application: CIP unit, Application 2
Meas. point 2: flow measurement concentrate station
Industry Solutions (SO)English -
Brewery application: Brewhouse, Application 1
Meas. Point 1: flow measurement mash water
Industry Solutions (SO)English -
Juice application: Mixing batch, Application 1
Meas. point 1: flow measurement water
Industry Solutions (SO)English -
Juice application: CIP unit, Application 1
Meas. point 1: flow measurement CIP-feed
Industry Solutions (SO)English -
Juice application: CIP unit, Application 2
Meas. point 2: flow measurement concentrate station
Industry Solutions (SO)English -
Brewery application: High Gravity unit, Application 1
Meas. point 1: flow measurement beer
Industry Solutions (SO)English -
Brewery application: Bright beer buffer tanks, Application 1
Meas. point 1: flow measurement beer
Industry Solutions (SO)English -
Brewery application: Fermentation and Maturation, Application 15
Meas. point 12: flow measurement during blending
Industry Solutions (SO)English -
Brewery application: Fermentation and Maturation, Application 2
Meas. point 2: flow measurement wort
Industry Solutions (SO)English -
Brewery application: CIP unit, Application 1
Meas. point 1: flow measurement CIP-feed
Industry Solutions (SO)English -
Dairy application: Cheese processing, Application 3
Meas. point 2: dosing of culture
Industry Solutions (SO)English -
Brewery application: Filling, Application 1
Meas. point 1: flow measurement to the filler
Industry Solutions (SO)English -
Brewery application: Brewhouse, Application 10
Meas. point 8: flow measurement wort
Application 2: MagmeterIndustry Solutions (SO)English -
Juice application: Juice pasteuriser, Application 5
Meas. point 4: flow measurement pasteuriser
Industry Solutions (SO)English -
Dairy application: Milk reception, Application 3
Meas. point 2: flow measurement milk reception
Application 1: PromagIndustry Solutions (SO)English -
Brewery application: Filtration and Stabilisation, Application 1
Meas. point 1: flow measurement beer fitrate
Industry Solutions (SO)English -
Dairy application: Milk and fat standardisation, Application 1
Meas. point 1: flow measurement of milk and cream
Industry Solutions (SO)English -
Juice application: Sugar dissolving, Application 1
Meas. point 1: flow measurement water
Industry Solutions (SO)English -
Juice application: Mixing continuous, Application 1
Meas. point 1: flow measurement water
Industry Solutions (SO)English -
Brewery application: Filtration and Stabilisation, Application 2
Meas. point 2: flow measurement kieselgur
Industry Solutions (SO)English -
Chemicals: Waste Feed
PROline Promag successful application
Industry Solutions (SO)English -
Brewery application: Yeast propagation, Application 1
Meas. point 1: flow measurement yeast
Application 1: MagmeterIndustry Solutions (SO)English -
Dairy application: Pasteurisation, Application 3
Meas. point 2: flow measurement at the pasteuriser
Industry Solutions (SO)English -
Brewery application: CIP unit, Application 2
Meas. point 2: flow measurement concentrate station
Industry Solutions (SO)English -
Pomiary przeplywu cieczy, pary i gazow. Oferta produktow i uslug
Pomiary przeplywu cieczy, pary i gazow. Oferta produktow i uslug
Fields of Activities (FA)11/13Polish -
Flow measurement in utilities - for the US Market
Energy management in your hands - customized solutions for
compressed air, gas, steam and waterCompetence Brochure (CP)12/10English -
Modern measurement on filling machines
Filling, cleaning and sterilization
Competence Brochure (CP)07/10English -
EDD Single, PDM_HART_FL_Promag23_0x0046_0x01_0x01, 12.11.2018 (Flow, Promag, 0x0046)
HART,
PDM Version: 6.0 SP5Electronic Data Description (EDD)1.00.00Language neutral -
DTM Single, Promag_23_V2_02_00___V2_03_00, 23.10.2020 (Flow, Promag, 0x0046)
HART,
DeviceCare Version: 1.07.00
Field Xpert - SMT70 Version: 1.05.00
FieldCare Version: 2.15.00Device Type Manager (DTM)1.4.188.39Language neutral -
DTM Single, Promag_23_V2_00_00___V2_01_00, 23.10.2020 (Flow, Promag, 0x0046)
HART,
DeviceCare Version: 1.07.00
Field Xpert - SMT70 Version: 1.05.00
FieldCare Version: 2.15.00Device Type Manager (DTM)1.4.188.39Language neutral -
Promag 23
Product Code: 23H-, 23P-
Declaration Number: PTB 00 ATEX 2078EU DeclarationGerman , English , fr -
Promag 23
Product Code: 23H-, 23P-
EU DeclarationGerman , English , fr -
Promag 23
Product Code: 23H-, 23P-
EU DeclarationGerman , English , fr -
Promag 23
Product Code: 23P-, 23H-
Region/Country: Canada
Approval Agency: CSAExplosion ProtectionEnglish -
Promag 23
Product Code: 23P-, 23H-
Region/Country: Canada
Approval Agency: CSA
Category: I/2/A,B,C,D/, II,III/1/E,F,G/
Protection: DIP, NIExplosion ProtectionEnglish -
Promag 23
Product Code: 23P-, 23H-
Region/Country: Europe (ATEX)
Approval Agency: PTB
Category: II 2 G
Protection: EEx iaExplosion ProtectionGerman , English -
Promag 23
Product Code: 23P-, 23H-
Region/Country: USA
Approval Agency: FM
Category: I/2/A,B,C,D/
Protection: NIExplosion ProtectionEnglish -
Promag 23
Product Code: 23P-, 23H-
Region/Country: USA
Approval Agency: FM
Category: I/1/A,B,C,D/
Protection: ISExplosion ProtectionEnglish -
Dosimag, Dosimag OEM, Promag 10, Promag 23, Promag 50, Promag 53, Promag 55, Promag H
Product Code: O5H2B-, O5H1B-, DDA-, 5SH-, 5RH-, 5H5B-, 5H3B-, 5H2B-, 5H1B-, 5H-, 5DH-, 5CH-, 5BH-, 55H-, 53H-, 50H-, 23H-, 10H-
Region/Country: International
Approval Agency:Hygienic EquipmentEnglish -
Promag 10, Promag 23, Promag 50, Promag 53, Promag 55
Product Code: 10H-, 23H-, 50H-, 53H-, 55H-
Region/Country: USA
Approval Agency: 3-A Sanitary StandardsHygienic EquipmentEnglish -
Promag 53, Promag 50, Promag 10, Promag 23
Product Code: 53H-, 50H-, 10H-, 23H-
Region/Country: Europe
Approval Agency: TNOHygienic EquipmentEnglish -
Promag 53, Promag 50, Promag 35, Promag 23, Promag 10
Product Code: 50W-, 53P-, 53W-, 53H-, 50P-, 50H-, 10P-, 10H-, 10W-, 23H-, 35S-, 23P-
Region/Country: PolandPressure EquipmentEnglish , Polish -
Promag 10, Promag 23, Promag 50, Promag 51, Promag 53, Promag 55
Product Code: 55S-, 55H-, 53W-, 53P-, 53H-, 51W-, 51P-, 50W-, 50P-, 50L-, 50H-, 50D-, 23P-, 23H-, 10W-, 10P-, 10L-, 10H-, 10D-
Region/Country: Kazakhstan
Approval Agency: MEMST
Approval Number: GOST-12129MetrologyRussian
Accessories / Spare parts
-
-
Nr 2 Order code 50094004
Kit T-DAT Transmitter Data Chip
-
-
-
Nr 5 Order code 50103527
Kit cover 23/72/73/92F blind version
-
-
-
Nr 10 Order code 50096840
Kit 10 cable glands M20x1,5
-
Nr 10 Order code 50098036
Kit 10 cable glands M20x1.5 Ex
-
-
-
Nr 9 Order code 50097147
-
-
-
Nr 14 Order code 50098020
Kit parts housing compact Stnd/HT
Usage: 10/23/50/51/53/55 Sensor: D/E/H/L/P/S/W
-
-
-
Nr 15 Order code 50098021
Kit housing gaskets H compact
-
-
-
Order code 71129286
-
Order code DKH-
Promag H, mounting set
A mounting set includes 2 process connections incl. screws and the corresponding seals.
-
Order code DK5G-
Promag H/Dosimag, seal set
-
Order code DK5HM-
Promag H, wall mounting set
-
Order code DK5HW-
Promag H, weld in tool
-
Order code DK5HA-
Promag H, adapter set
Replacement of sensor Promag A or Promag H DN 25. The set includes 2 adapters and 2 seals. For dimensions refer to the technical documentation.
-
Order code DK5HR-
-
Order code FXA193-
Serviceinterface FXA193
The service interface connects the service port of Proline and ToF devices with the serial interface RS 232C (9 pin.) of a personal computer. Contents of delivery: - Serviceinterface with RS 232C connection cable (9 pin.) - FXA "USB" cable, the additional power supply for FXA193 from USB-port of the PC.
-
-
Successor
-
Standard products
- Reliable, robust and low-maintenance
Technical excellence
Simplicity
-
Specialized products
- Designed for demanding applications
Technical excellence
Simplicity
Variable
FLEX selections Technical excellence Simplicity - F
- L
- E
- X
Fundamental selection
Meet your basic measurement needs
Technical excellence Simplicity - F
- L
- E
- X
Lean selection
Handle your core processes easily
Technical excellence Simplicity - F
- L
- E
- X
Extended selection
Optimize your processes with innovative technologies
Technical excellence Simplicity - F
- L
- E
- X
Xpert selection
Master your most challenging applications
Technical excellence Simplicity Variable
-