The Unifit CPA442 process assembly is the simple solution for pH/ORP or oxygen measurement in tanks and pipelines of hygienic and sterile applications. Unifit is designed for inline cleaning and sterilization according to EHEDG and 3A criteria. You can be absolutely sure that your high-quality products are never contaminated but always completely safe.
Standard products
Technical excellence
Simplicity
Specialized products
Technical excellence
Simplicity
Variable
| FLEX selections | Technical excellence | Simplicity |
|---|---|---|
Fundamental selection Meet your basic measurement needs |
Technical excellence
|
Simplicity
|
Lean selection Handle your core processes easily |
Technical excellence
|
Simplicity
|
Extended selection Optimize your processes with innovative technologies |
Technical excellence
|
Simplicity
|
Xpert selection Master your most challenging applications |
Technical excellence
|
Simplicity
Variable |
max. 140°C
(284°F)
max. 10 bar
(145 psi)
Certified hygienic design: Complies with 3A standard 74-05 and the criteria of EHEDG Class I
No contamination thanks to leak-tight, built-in electrode seal (molded seal)
Electropolished surface prevents build-up of residues (Ra=0.38 µm or 0.76 µm)
Suitable...
Unifit CPA442 is intended for permanent installation in tanks and pipework in:
Food and beverage
Life sciences
Water treatment
Chemicals
It is suitable for use with pressures of up to 12 bar (stainless steel).
Process assembly
For safe installation of 12 mm sensors (Pg 13.5) in the food, beverage,
pharmaceitical and chemical industry.
Process assembly
For installation of 120 mm sensors in food industry, biotechnology and
chemical industry
TSE/BSE free
From sensors to complete turnkey solutions
Vom Sensor bis zur schlüsselfertigen Komplettlösung
Od senzorů po kompletní dodávku na klíč
Desde sensores hasta soluciones completas
Dai sensori singoli a soluzioni
complete “chiavi in mano”
産業プロセスにおける pH 測定
Selection and engineering guide for your industry and application
White Paper CP971C pH measurement and control in a power utility is an
integral part of process. The scrubber efficiency is highlydependent on
the pH. Numerous opportunities were revealed for saving time, as well as
the cost and materials in power plants. In afossil fuel power plant,
the
chemical energy stored in coal, oil, natural gas, shale oil, oxygen and
air
is converted into thermal, mechanical and finally into electrical
energy. In
other words, water is heated to steam, which spins a steam turbine. The
steam turbine drives an electrical generator.
This white paper will address
Knowing when to do a pH sensor calibration versus a calibration
check
How to properly clean a pH sensor
How to perform a pH sensor calibration
A decision tree for step by step guidance
Oxymax H COS21D in use in a brewery
Product Code: CPA442-
Declaration Number: HE_00679_02.17
Manufacturer Specification: 1935/2004
Product Code: CPA442-
Declaration Number: FDA_00228_01.19
Product Code: CPA442-
Declaration Number: FDA_00227_01.19
Sealing set FPM CPA442, FDA listed
Sealing set FPM CPA442, pharma CoC cert.
Sealing set EPDM CPA442, FDA listed
Sealings EPDM CPA442, pharma CoC cert.
Sealing set Silicon CPA442, FDA listed
Kit CPA442: Union nut G11/4" brass
Kit CPA442: Union nut G11/4" brass nickel-plated brass, includes Snap ring
Kit CPA442: Union nut G11/4", 316Ti
Kit CPA442: Union nut G11/4", 316Ti includes Snap ring
Kit CPA442: Protection cover POM/316Ti
Kit CPA442: Protection cover POM/316Ti
Please select your market / region
