Promag 23H

Sản phẩm này không có sẵn.

Vui lòng kiểm tra sản phẩm thế hệ mới trong phần sản phẩm trước đây / sản phẩm thay thế hoặc liên hệ với Endress+Hauser/ đại diện Endress+Hauser địa phương.

Tài liệu / Tài liệu hướng dẫn / Phần mềm

Hình thức tải về

Lọc

Proline Promag 23H Technical Information
Electromagnetic Flow Measuring System (two-wire, loop-powered) for measuring the flow of conductive fluids in hygiene, food and beverage or process applications.

Technical Information (TI)
Proline Promag 23 HART Operating Instructions
Electromagnetic Flow Measuring System (Two-wire, loop-powered) for measuring the flow rate of conductive fluids. The description ofthe device functions are in a separate documentation.

Operating Instruction (BA)
Proline Promag 23 HART Description of Device Functions
Description of the device functions (options and inputs). Additional documentation for Operating Instructions PROline Promag 23.

Operating Instruction (BA)
Proline Promag 23 Brief Operating Instructions
Electromagnetic Flow Measuring System (two-wire, loop-powered)

Short Instruction (KA)

11/10

Tiếng Anh
Interface parts Installation Instructions
Promag 10, 23, 50, 51, 53, 55, 400, 800

Mounting Instruction (EA)
Replacing S-DAT Installation Instructions
Promag 23, 50, 51, 53, 55, Promass 40, 80, 83, 84, 8ME, 8WF, Cubemass DCI 8CN, CNGmass DCI 8DF, t-mass 65

Mounting Instruction (EA)
Replacing T-DAT Installation Instructions
Promag 23, 53, 55, Promass 83, 84, 8WF, 8ME, Cubemass DCI 8CN, CNGmass DCI 8DF, Prosonic Flow 91, 93, t-mass 65

Mounting Instruction (EA)
Distance sleeves in plastic process connections, sensor nominal diameter DIN DN 25 and ANSI 1" Installation Instructions
Promag 10 H, 23 H, 50 H, 53 H, 55 H

Mounting Instruction (EA)
Replacement transmitter Promag 10, 23, 50, 53, 55
Installation Instructions

Mounting Instruction (EA)
Transmitter parts Promag 23
Installation Instructions

Mounting Instruction (EA)
Replacing cover and O-ring Installation Instructions
romag 10, 23, 50, 51, 53, 55, 400, 800, Promass 40, 80, 83, 84, 8ME, CNGmass 8FF, LPGmass 8FE, Cubemass 8CM, Prosonic Flow 90, 91,9 2, 93, t-mass 65, Prowirl 72, 73

Mounting Instruction (EA)
Proline Promag 23 Division 1 Ex documentation
Ex-Dokumentation zur Betriebsanleitung BA045D, BA050D. Ex documentation for the operating instruction BA045D, BA050D. Documentation Ex relative à la mise en service BA045D, BA050D.

Ex Safety Instructions (XA)
Proline Promag 23 ATEX II3G Ex documentation
Ex-Dokumentation zur Betriebsanleitung BA045D, BA050D. Ex documentation for the operating instruction BA045D, BA050D. Documentation Ex relative à la mise en service BA045D, BA050D.

Ex Safety Instructions (XA)
Proline Promag 23 ATEX II2G Ex documentation
Ex-Dokumentation zur Betriebsanleitung BA045D, BA050D. Ex documentation for the operating instruction BA045D, BA050D. Documentation Ex relative à la mise en service BA045D, BA050D.

Ex Safety Instructions (XA)
Change of Directives Special Documentation
Change of Directives

Special Documentation (SD)
Proline Promag H Sonderdokumentation Special documentation Documentation special
Wichtiger Hinweis zum Dichtungsset Promag H. Important Information concerning this Seals Set Promag H. Information important concernant ce set de joint Promag H.

Special Documentation (SD)
Proline Promag H Mounting existing process connections on new sensors Special documentation
Electromagnetic flow measuring system

Special Documentation (SD)
Proline Promag 10, 23, 50, 51, 53, 55 Information on the PED Special Documentation
Electromagnetic flowmeter

Special Documentation (SD)
Proline Promag 23 Manufacturer information regarding software updates (NE 53)
New software version: Promag 23 HART: 2.02.03 (DE/EN) / 2.03.03 (FR/IT)

Manufacturer Information (MI)
Proline Promag 23 Manufacturer information regarding software updates (NE 53)
New software version: Promag 23 HART: 2.02.02 (DE/EN) / 2.03.02 (FR/IT)

Manufacturer Information (MI)
Proline Promag 23 Manufacturer information regarding software updates (NE 53)
New software version: Promag 23 HART: 2.02.01 (DE/EN) / 2.03.01 (FR/IT)

Manufacturer Information (MI)
Zasilanie przepływomierzy- art CE 11_2011
Dwuprzewodowe zasilanie urządzeń obiektowych oznacza, że dostarczenie energii zasilającej oraz transmisja sygnału pomiarowego są realizowane tymi samymi, dwoma przewodami. Popularna infrastruktura kablowa dla większości urządzeń pomiarowych, jak przetworniki ciśnienia, temperatury czy poziomu.

Publications (PU)

03/12

Người Ba Lan
Juice application: CIP unit, Application 1
Meas. point 1: flow measurement CIP-feed

Industry Solutions (SO)

Tiếng Anh
Brewery application: Fermentation and Maturation, Application 15
Meas. point 12: flow measurement during blending

Industry Solutions (SO)

Tiếng Anh
Dairy application: Butter processing, Application 6
Meas. point 4: flow measurement of salt solution

Industry Solutions (SO)

Tiếng Anh
Brewery application: Filling, Application 5
Meas. point 5: flow measurement filler

Industry Solutions (SO)

Tiếng Anh
Juice application: Sugar dissolving, Application 1
Meas. point 1: flow measurement water

Industry Solutions (SO)

Tiếng Anh
Brewery application: Wort Cooler, Application 1
Meas. point 1: flow measurement wort Application 1: Magmeter

Industry Solutions (SO)

Tiếng Anh
Brewery application: Brewhouse, Application 1
Meas. Point 1: flow measurement mash water

Industry Solutions (SO)

Tiếng Anh
Brewery application: Yeast propagation, Application 1
Meas. point 1: flow measurement yeast Application 1: Magmeter

Industry Solutions (SO)

Tiếng Anh
Brewery application: High Gravity unit, Application 1
Meas. point 1: flow measurement beer

Industry Solutions (SO)

Tiếng Anh
Juice application: Mixing batch, Application 1
Meas. point 1: flow measurement water

Industry Solutions (SO)

Tiếng Anh
Dairy application: UHT unit, Application 3
Meas. point 2: flow measurement at the UHT

Industry Solutions (SO)

Tiếng Anh
Dairy application: Milk and fat standardisation, Application 1
Meas. point 1: flow measurement of milk and cream

Industry Solutions (SO)

Tiếng Anh
Brewery application: CIP unit, Application 1
Meas. point 1: flow measurement CIP-feed

Industry Solutions (SO)

Tiếng Anh
Brewery application: Filtration and Stabilisation, Application 2
Meas. point 2: flow measurement kieselgur

Industry Solutions (SO)

Tiếng Anh
Brewery application: Fermentation and Maturation, Application 2
Meas. point 2: flow measurement wort

Industry Solutions (SO)

Tiếng Anh
Brewery application: Brewhouse, Application 15
Meas. Point 13: flow measurement mash filter

Industry Solutions (SO)

Tiếng Anh
Brewery application: Brewhouse, Application 10
Meas. point 8: flow measurement wort Application 2: Magmeter

Industry Solutions (SO)

Tiếng Anh
Dairy application: Pasteurisation, Application 3
Meas. point 2: flow measurement at the pasteuriser

Industry Solutions (SO)

Tiếng Anh
Chemicals: Waste Feed
PROline Promag successful application

Industry Solutions (SO)

Tiếng Anh
Brewery application: Filling, Application 1
Meas. point 1: flow measurement to the filler

Industry Solutions (SO)

Tiếng Anh
Dairy application: Cheese processing, Application 3
Meas. point 2: dosing of culture

Industry Solutions (SO)

Tiếng Anh
Dairy application: CIP unit, Application 2
Meas. point 2: flow measurement concentrate station

Industry Solutions (SO)

Tiếng Anh
Brewery application: Bright beer buffer tanks, Application 1
Meas. point 1: flow measurement beer

Industry Solutions (SO)

Tiếng Anh
Brewery application: Filtration and Stabilisation, Application 1
Meas. point 1: flow measurement beer fitrate

Industry Solutions (SO)

Tiếng Anh
Juice application: Juice pasteuriser, Application 5
Meas. point 4: flow measurement pasteuriser

Industry Solutions (SO)

Tiếng Anh
Dairy application: CIP unit, Application 1
Meas. point 1: flow measurement CIP-feed

Industry Solutions (SO)

Tiếng Anh
Juice application: Mixing continuous, Application 1
Meas. point 1: flow measurement water

Industry Solutions (SO)

Tiếng Anh
Brewery application: CIP unit, Application 2
Meas. point 2: flow measurement concentrate station

Industry Solutions (SO)

Tiếng Anh
Dairy application: Milk reception, Application 3
Meas. point 2: flow measurement milk reception Application 1: Promag

Industry Solutions (SO)

Tiếng Anh
Juice application: CIP unit, Application 2
Meas. point 2: flow measurement concentrate station

Industry Solutions (SO)

Tiếng Anh
Juice application: Raw juice, Application 1
Meas. point 1: flow measurement raw juice

Industry Solutions (SO)

Tiếng Anh
Pomiary przeplywu cieczy, pary i gazow. Oferta produktow i uslug
Pomiary przeplywu cieczy, pary i gazow. Oferta produktow i uslug

Fields of Activities (FA)

11/13

Người Ba Lan
Flow measurement in utilities - for the US Market
Energy management in your hands - customized solutions for compressed air, gas, steam and water

Competence Brochure (CP)

12/10

Tiếng Anh
Modern measurement on filling machines
Filling, cleaning and sterilization

Competence Brochure (CP)

07/10

Tiếng Anh
A 15% cost saving in sludge dewatering by reducing flocculant dosage.
Dewatering of sludge is a process aimed at reducing its volume by removing as much water as possible. Frequently this is done mechanically, where the sediment is subjected to a so-called conditioning process; this involves changing the structure and properties of the sediment, weakening the forces binding water to the surface of particles. A commonly used method of conditioning is a chemical method and consists of adding electrolytes to the sludge, such as aluminum sulfate, ferric sulfate or ferric chloride, or polyelectrolytes based on organic polymers.

Case Studies (CS)

06/11

Tiếng Anh
EDD Library, PDM_HA_FL_Package_V_1_14_00, 06.08.2015 (Flow)
HART, PDM Version: 6.0 SP5, 6.0 SP5 HF5, 6.1, 8.0, 8.0.2, 8.1, 8.1 SP1, 8.2, 8.2 SP 1

Electronic Data Description (EDD)

1.14.00

Language neutral
EDD Single, PDM_HART_FL_Promag23_0x0046_0x01_0x01, 12.11.2018 (Flow, Promag, 0x0046)
HART, PDM Version: 6.0 SP5

Electronic Data Description (EDD)

1.00.00

Language neutral
DTM Single, Promag_23_V2_02_00___V2_03_00, 01.12.2017 (Flow, Promag, 0x0046)
HART, DeviceCare Version: 1.04.00 FieldCare Version: 2.12.00

Device Type Manager (DTM)

1.4.188.39

Language neutral
DTM Single, Promag_23_V2_00_00___V2_01_00, 30.11.2017 (Flow, Promag, 0x0046)
HART, DeviceCare Version: 1.04.00 FieldCare Version: 2.12.00

Device Type Manager (DTM)

1.4.188.39

Language neutral
Promag 53, Promag H, Promag 50, Dosimag, Promag 10, Promag 23, Promag 55
Product Code: 5HB-, 53H-, 50H-, 55H-, 10H-, 23H-, 5BH-

Manufacturer Declaration

Tiếng Anh
Promag 10, Promag 23, Promag 50, Promag 53, Promag 55
Product Code: 10H-, 23H-, 50H-, 53H-, 55H-

FDA Declaration

Tiếng Đức , Tiếng Anh
Promag 10, Promag 23, Promag 50, Promag 53
Product Code: 53H-, 50H-, 23H-, 10H- Declaration Number: FDA-03002D/06

FDA Declaration

Tiếng Đức , Tiếng Anh
Promag 10, Promag 23, Promag 50, Promag 53, Promag H
Product Code: 5H2B-, 55H-, 53H-, 50H-, 23H-, 10H-

FDA Declaration

Tiếng Đức , Tiếng Anh
Promag 10, Promag 23, Promag 50, Promag 53
Product Code: 53H-, 50H-, 23H-, 10H- Declaration Number: FDA-03002B_06

FDA Declaration

Tiếng Đức , Tiếng Anh , fr
Promag 23
Product Code: 23H-, 23P- Declaration Number: PTB 00 ATEX 2078

EU Declaration

Tiếng Đức , Tiếng Anh , fr
Promag 23
Product Code: 23H-, 23P-

EU Declaration

Tiếng Đức , Tiếng Anh , fr
Promag 23
Product Code: 23H-, 23P-

EU Declaration

Tiếng Đức , Tiếng Anh , fr
Promag 23
Product Code: 23P-, 23H- Region/Country: USA Approval Agency: FM Category: CL. I, DIV. 1 Protection: IS

Explosion Protection

Tiếng Anh
Promag 23
Product Code: 23P-, 23H- Region/Country: Europe (ATEX) Approval Agency: PTB Category: II2G Protection: EEx ia IIC T3 ...T6

Explosion Protection

Tiếng Đức , Tiếng Anh
Promag 23
Product Code: 23H-, 23P- Region/Country: South Africa Approval Agency: SABS Protection: Ex ia IIC T6...T3

Explosion Protection

Tiếng Anh
Promag 23
Product Code: 23P-, 23H- Region/Country: USA Approval Agency: FM Category: CL. I, DIV. 2 Protection: NI

Explosion Protection

Tiếng Anh
Promag 23
Product Code: 23P-, 23H- Region/Country: Canada Approval Agency: CSA Category: I/2/A,B,C,D/, II,III/1/E,F,G/ Protection: DIP, NI

Explosion Protection

Tiếng Anh
Promag 23, Promag 50, Promag 51, Promag 53
Product Code: 53W-, 53P-, 53H-, 51W-, 51P-, 50W-, 50P-, 50H-, 23P-, 23H- Region/Country: Belarus

Explosion Protection

Tiếng Nga
Promag 23
Product Code: 23P-, 23H- Region/Country: Canada Approval Agency: CSA

Explosion Protection

Tiếng Anh
Promag 10, Promag 23, Promag 50, Promag 53, Promag 55, Promag H
Product Code: O5H2B-, O5H1B-, 5H5B-, 5H3B-, 5H2B-, 5H1B-, 55H-, 53H-, 50H-, 23H-, 10H- Region/Country: Europe Approval Agency: TÜV

Hygienic Equipment

Tiếng Anh
Promag 53, Promag 50, Promag 10, Promag 23
Product Code: 53H-, 50H-, 10H-, 23H- Region/Country: Europe Approval Agency: TNO

Hygienic Equipment

Tiếng Anh
Promag 10, Promag 23, Promag 50, Promag 53, Promag 55
Product Code: 10H-, 23H-, 50H-, 53H-, 55H- Region/Country: USA Approval Agency: 3-A Sanitary Standards

Hygienic Equipment

Tiếng Anh
Promag 53, Promag 50, Promag 35, Promag 23, Promag 10
Product Code: 50W-, 53P-, 53W-, 53H-, 50P-, 50H-, 10P-, 10H-, 10W-, 23H-, 35S-, 23P- Region/Country: Poland

Pressure Equipment

Tiếng Anh , Người Ba Lan
Promag 10, Promag 23, Promag 50, Promag 51, Promag 53, Promag 55, Promag D, Promag L, Promag W
Product Code: 5W8B-, 5W4-, 5L8B-, 5L4-, 5D4-, 55S-, 53W-, 53P-, 53H-, 51W-, 51P-, 50W-, 50P-, 50L-, 50H-, 50D-, 23P-, 23H-, 10L-, 10H-, 10D-, 10W-, 10P-, 55H- Region/Country: Uzbekistan Approval Agency: UZS Approval Number: 02.4808

Metrology

Tiếng Nga
Promag 10, Promag 23, Promag 50, Promag 51, Promag 53, Promag 55
Product Code: 55S-, 55H-, 53W-, 53P-, 53H-, 51W-, 51P-, 50W-, 50P-, 50L-, 50H-, 50D-, 23P-, 23H-, 10W-, 10P-, 10L-, 10H-, 10D- Region/Country: Kazakhstan Approval Agency: MEMST Approval Number: GOST-12129

Metrology

Tiếng Nga
Promag 10, Promag 23, Promag 50, Promag 51, Promag 53, Promag E, Promag 55, Promag H, Promag P, Promag W
Product Code: 10E-, 53E-, 53H-, 53L-, 53P-, 53W-, 55H-, 55S-, 5D4-, 5E1B-, 5H1B-, 5H2B-, 5L4-, 5W4-, 5P1B-, 5P2B-, 5W8B-, 10D-, 10H-, 10L-, 10P-, 10W-, 23H-, 23P-, 50D-, 50E-, 50H-, 50L-, 50P-, 50W-, 51P-, 51W- Region/Country: Approval Agency: AZSTAND Approval Number: CH.S.29.999.Ü 001318

Metrology

Sản phẩm mới
- Proline Promag H 200 / 5H2B
  
  The flowmeter for smallest flow rates with genuine loop-powered technology. For demanding hygienic applications.
  Thông tin bổ sung

Promag 23H

Tài liệu / Tài liệu hướng dẫn / Phần mềm

Sản phẩm mới

Proline Promag H 200 / 5H2B