Analog disinfection sensor
CCS140
Standard sensor for industrial and pool water treatment
-
©Endress+Hauser
CCS140 is the analog sensor for standard measurement of free chlorine. It delivers reliable values even if fluctuations in flow or conductivity occur and allows control of the disinfection loop so that the water is free of germs. At the same time, the sensor is designed for long calibration and service intervals reducing your maintenance effort.
Lợi ích
Recalibration intervals approx. 1 to 4 months under constant operating conditions
Easy membrane replacement thanks to prefabricated membrane cap
Measured values are not affected by conductivity fluctuation
Measurement virtually independent of flow rate in the range above 30 l/h
Zero-point calibration not required. No complex installation of an activated carbon filter, as found with open chlorine sensors.
Phạm vi ứng dụng
CCS140 measures free chlorine in:
Industrial process water
- Process applications, e.g. bottle rinsing machinesWastewater treatment plants
- Reuse of cleaned outlet waterUtilities of all industries
- All disinfection measuring pointsPool water
