Manual or automatic retractable assembly Cleanfit CPA474
Assembly with ball valve for chemical and industrial wastewater applications
The Cleanfit CPA474 retractable assembly is designed for applications which require safe separation from the process and contain media that could affect stainless steel. It offers highest operating comfort: You can replace sensors and even service the assembly while the process is running. The optional electric or pneumatic control system enables automated cleaning and calibration even in difficult processes.
-
Lợi ích
Safe and reliable separation from the process by ball valve, even under harsh conditions
Suitable for corrosive media: Only polymers (PP, PVDF, PEEK) in contact with medium
No process interruption for electrode cleaning and calibration – saves maintenance...
-
Phạm vi ứng dụng
Cleanfit CPA474 is intended for use in tanks and pipes in:
Chemical industry
Wastewater / industrial water
Power plants
Refuse incinerators
It is suitable to be used with pressures of up to 10 bar (stainless steel cylinder) or 6 bar (PA cylinder).
Tài liệu / Tài liệu hướng dẫn / Phần mềm
-
Technical Information Topcal S CPC310
Fully automatic measuring, cleaning and calibration system in hazardous
and non-hazardous areasTechnical Information (TI) -
Technical Information Retractable Assembly Cleanfit CPA474
Retractable process assembly with ball valve, for pH and ORP electrodes
Technical Information (TI) -
Operating Instructions Cleanfit CPA474
Retractable process assembly with ball valve for pH and redox sensors
Operating Instruction (BA) -
Sonderdokumentation Sicherheitskit CPA473/474
Special documentation Safety kit CPA473/474
Sicherheitskit CPA473/474
Safety kit CPA473/474Special Documentation (SD) -
SD CleanFit Servicekits / Spare part kits
CleanFit Wechselarmaturen / Retractable assemblies
Special Documentation (SD) -
pH 測定セレクションガイド
産業プロセスにおける pH 測定
Competence Brochure (CP)08/15Tiếng Nhật -
CP00010C pH measurement in industrial processes for US market
Selection and engineering guide for your industry and application
Competence Brochure (CP)04/15Tiếng Anh -
Measurement and control aspect of pH using inductively coupled with
bidirectional Memosens technology in flue gas desulfurization process
White Paper CP971C pH measurement and control in a power utility is an
integral part of process. The scrubber efficiency is highlydependent on
the pH. Numerous opportunities were revealed for saving time, as well as
the cost and materials in power plants. In afossil fuel power plant,
the
chemical energy stored in coal, oil, natural gas, shale oil, oxygen and
air
is converted into thermal, mechanical and finally into electrical
energy. In
other words, water is heated to steam, which spins a steam turbine. The
steam turbine drives an electrical generator.Competence Brochure (CP)04/11Tiếng Anh -
pH-Messung in Industrieprozessen
Auswahl- und Engineering-Hilfe für verschiedene Industriebranchen und
ApplikationenCompetence Brochure (CP)03/20Tiếng Đức -
pH measurement in industrial processes
Selection and engineering guide for different industries and
applicationsCompetence Brochure (CP)02/20Tiếng Anh -
CP01202C pH Sensors:Calibrate, clean, perform a calibration check
or...?
This white paper will address
Knowing when to do a pH sensor calibration versus a calibration
check
How to properly clean a pH sensor
How to perform a pH sensor calibration
A decision tree for step by step guidanceCompetence Brochure (CP)02/12Tiếng Anh -
Reliable pH measurement for heavy-duty
applications in the chemical industry
Automatic cleaning and calibration with Topcal S CPC310
Case Studies (CS)09/08Tiếng Anh -
Zuverlässige pH-Messung für Heavy-Duty-Anwendungen in der
Chemieindustrie
Automatisch reinigen und kalibrieren mit Topcal S CPC310. Im Laufe der
Produktionsprozesse fällt stark salzhaltiges Abwasser an. Die
regelmäßige Reinigung und Kalibrierung der pH-Elektrode sind an dieser
Messstelle essentiell, um permanent
zuverlässige pH-Messwerte zu erhalten.Case Studies (CS)09/08Tiếng Đức -
CleanFit P
Product Code: CPA473-, CPA474-
Declaration Number: HE_01323_01.20
Manufacturer Specification: Explosion protectionManufacturer DeclarationTiếng Đức , Tiếng Anh
Phụ kiện / Phụ tùng thay thế
-
-
Order code 51502874
Pneum. proxim. switches f.retrofitting
-
Order code 51503716
KIT CPA471/472 shaft pneum long
-
Order code 51503718
KIT CPA471/472 lift tube gel hand long
-
Order code 51503730
KIT CPA47x pneu.connection G1/8 AD6 10p
-
Order code 51503731
KIT CPA47x:stop bolt with handle (1 pc.)
-
Order code 51503774
KIT CPA473/474 cylinder PA short
-
Order code 51503776
KIT CPA471 long+474 short: Cylinder SS
-
Order code 51511874
O-Ring set EPDM CPA474
-
Order code 51511875
O-Ring set VITON CPA474
-
Order code 51511876
O-Ring set Perfluorelast CPA474
-
Order code 51511935
Outlet valve pneumatic CPA474 G1/4"
-
Order code 51511936
Outlet valve pneumatic CPA474 NPT1/4"
-
Order code 51511937
Outlet valve manual CPA473/474 G1/4"
-
Order code 51511938
Outlet valve manual CPA473/474 NPT1/4"
-
Order code 51511939
Check valve CPA473/474 G1/4"
-
Order code 51511940
Check valve CPA473/474 NPT1/4"
-
Order code 51512679
KIT CPA474 Electrode guide PP short
-
Order code 51512681
KIT CPA474 electrode guide PVDF short
-
Order code 51512682
KIT CPA474 electrode guide PEEK short
-
Order code 51512683
KIT CPA474 electrode guide PP long
-
Order code 51512684
Kit CPA474 electrode guide PVDF long
-
Order code 51512685
KIT CPA474 electrode guide PEEK long
-
Order code 51512690
Kit CPA474 rinsing chamber PP
-
Order code 51512691
Kit CPA474 rinsing chamber PVDF
-
Order code 51512692
Kit CPA474 rinsing chamber PEEK
-
Order code 51512693
Kit CPA474 PP press proof ,rins. chamber
-
Order code 51512694
Kit CPA474 PVDF pr.proof, rins. chamber
-
Order code 51512695
Kit CPA474 PEEK pr. proof, rins. chamber
-
Order code 51512699
KIT CPA474 PP-EPDM, ball valve
-
Order code 51512700
KIT CPA474 ball valve PP-VITON
-
Order code 51512701
KIT CPA474 PP-FFKM, ball valve
-
Order code 51512702
KIT CPA474 PVDF-EPDM, ball valve
-
Order code 51512703
KIT CPA474 PVDF-VITON, ball valve
-
Order code 51512704
KIT CPA474 PVDF-FFKM, ball valve
-
Order code 51512705
KIT CPA474 rinse connectors 1/4" PVDF
-
Order code 51512706
KIT CPA474, rinse connectors NPT1/4"
-
Order code 51512709
KIT CPA474 Actuation pneumatic complete
-
Order code 51512710
KIT CPA474 Actuation pneum. compl. el.
-
Order code 51513005
KIT CPA473/474 pneum. re.pipe gel 360mm
-
Order code 51513006
KIT CPA473/474 manual, re.pipe gel 360mm
-
Order code 51517522
Splash protection cap for assemblies
-
Order code 51518483
O-Ring set EPDM for CPA474
-
Order code 51518484
O-Ring set Viton CPA474
-
Order code 51518485
O-Ring set Kalrez for CPA474
-
Order code 71042130
KIT CPA473/474 cylinder PA long
-
Order code 71042134
KIT CPA473/474 cylinder 1.4404 long
-
Order code 71064624
CPA471...5 all seals w/o medium contact
-
Order code 71069835
Kit CPA471 EPDM w/o scraper: sleeve
-
Order code 71069846
Kit CPA471 Viton w/o scraper: sleeve
-
Order code 71069849
Kit CPA471 Kalrez w/o scraper: sleeve
-
Order code 71071451
Kit CPA473/474: Connection block pneumat
-
Order code 71082093
Kit CPA474 DN50 PVDF: Raised face
-
Order code 71082095
Kit CPA474 DN50 PEEK: Raised face
-
Order code 71082096
Kit CPA474 DN50 PP: Raised face
-
Order code 71082097
Kit CPA474 ANSI 2" PVDF: Raised face
-
Order code 71082100
Kit CPA474 ANSI 2" PEEK: Raised face
-
Order code 71082101
Kit CPA474 ANSI 2" PP: Raised face
-
Order code 71082102
Kit CPA47: Flange DN50 1.4404 (316L)
-
Order code 71082105
Kit CPA47: Flange ANSI 2" 1.4404 (316L)
-
Order code 71082107
Kit CPA47: intermediate flange ball valv
-
Order code 71099157
Kit CPA473, KCI pipe pneumatic
-
Order code 71099159
Kit CPA473 KCl-pipe manual
-
Order code 71217190
Manual Kits CPA474 2013
-
Order code 71240620
Kit CPA47x Outlet valve: O-rings Viton
-
Order code 71329948
KIT CPA473/474: Electr. proxim.switches
-
Order code 71329949
KIT CPA47X: Throttel check valve
-
Order code 71361237
Kit Sensor output interface
-
Order code C-PA080116-40
-
Order code C-PA080116-41
-
-
Sản phẩm cũ
