Promag 35S
Sản phẩm này không có sẵn.
Vui lòng kiểm tra sản phẩm thế hệ mới trong phần sản phẩm trước đây / sản phẩm thay thế hoặc liên hệ với Endress+Hauser/ đại diện Endress+Hauser địa phương.
Tài liệu / Tài liệu hướng dẫn / Phần mềm
-
Promag 35Technical Information
Electromagnetic Flow Measuring System for measuring the flow rate of conductive fluids with a high solids content, high abrasiveness, and a highly inhomogeneous distribution of additives and chemicals.
Technical Information (TI) -
Promag 35
Operating Instructions
Electromagnetic Flow Measuring System for measuring the flow rate of conductive fluids with a high solids content, high abrasiveness, and a highly inhomogeneous distribution of additives and chemicals.
Operating Instruction (BA) -
Promag 35PROFIBUS-PAOperating Instructions
Electromagnetic Flow Measuring System (with PROFIBUS-PA interface) for measuring the flow rate of conductive fluids with a high solids content, high abrasiveness, and a highly inhomogeneous distribution of additives and chemicals.
Operating Instruction (BA) -
Installing extension pieces converting Promag 35S to Promag 55S
Installation Instructions
Promag 35S, 55S
Mounting Instruction (EA) -
Promag 35
Sonderdokumentation
Special Documentation
Korrigenda Corrigendum
Special Documentation (SD) -
Simatic PDM HART Package 1.14.00
Manufacturer Information includes PDM - Device List, Release Notes –
HART
Manufacturer Information for users regarding software updates (following the NAMUR recommendation 53) New software version: 1.14.00
Manufacturer Information (MI) -
AMS HART Package V1.12.00
Manufacturer Information includes AMS - Device List, Release Notes –
HART
Manufacturer Information for users regarding software updates (following the NAMUR recommendation 53) New software version: 1.12.00
Manufacturer Information (MI) -
PRM HART Package V1.08.00
Manufacturer Information includes PRM - Device List, Release Notes –
HART
Manufacturer Information for users regarding software updates (following the NAMUR recommendation 53) New software version: 1.08.00
Manufacturer Information (MI) -
AMS FOUNDATION fieldbus Package V1.06.00
Manufacturer Information includes AMS - Device List, Release Notes –
FOUNDATION fieldbus
Manufacturer Information for users regarding software updates (following the NAMUR recommendation 53) New software version: 1.06.00
Manufacturer Information (MI) -
PRM FOUNDATION fieldbus Package V1.05.00
Manufacturer Information includes PRM - Device List, Release Notes –
FOUNDATION fieldbus
Manufacturer Information for users regarding software updates (following the NAMUR recommendation 53) New software version: 1.05.00
Manufacturer Information (MI) -
Simatic PDM PROFIBUS Package V1.12.00
Manufacturer Information includes PDM - Device List, Release Notes –
PROFIBUS
Manufacturer Information for users regarding software updates (following the NAMUR recommendation 53) New software version: 1.12.00
Manufacturer Information (MI) -
Flow measurement in utilities - for the US Market
Energy management in your hands - customized solutions for compressed air, gas, steam and water
Competence Brochure (CP)12/10Tiếng Anh -
Modern measurement on filling machines
Filling, cleaning and sterilization
Competence Brochure (CP)07/10Tiếng Anh -
A 15% cost saving in sludge dewatering by reducing flocculant dosage.
Dewatering of sludge is a process aimed at reducing its volume by removing as much water as possible. Frequently this is done mechanically, where the sediment is subjected to a so-called conditioning process; this involves changing the structure and properties of the sediment, weakening the forces binding water to the surface of particles. A commonly used method of conditioning is a chemical method and consists of adding electrolytes to the sludge, such as aluminum sulfate, ferric sulfate or ferric chloride, or polyelectrolytes based on organic polymers.
Case Studies (CS)06/11Tiếng Anh -
GSD Single, GSD_EH_DP_FL_Promag_0x1511_V02_06_00_DPLIB, 14.04.2014 (Flow,
Promag, 0x1511)
PROFIBUS DP, PROFIBUS System Version: Any
General Station Description (GSD)2.06.00Language neutral -
GSD Single, GSD_EH_PA_FL_Promag_0x1505_V02_05_03_PALIB, 22.04.2014 (Flow,
Promag, 0x1505b)
PROFIBUS PA, PROFIBUS System Version: Any
General Station Description (GSD)2.05.03Language neutral -
GSD Single, GSD_EH_DP_FL_Promag33_35_0x1505a_0x02_0x01, 11.11.2016 (Flow,
Promag, 0x1505a)
PROFIBUS DP, PROFIBUS System Version: Any
General Station Description (GSD)1.00.00Language neutral -
EDD Library, PDM_HA_FL_Package_V_1_14_00, 06.08.2015 (Flow)
HART, PDM Version: 6.0 SP5, 6.0 SP5 HF5, 6.1, 8.0, 8.0.2, 8.1, 8.1 SP1, 8.2, 8.2 SP 1
Electronic Data Description (EDD)1.14.00Language neutral -
EDD Library, PDM_PA_Flow_Package_V_1_12_00, 30.07.2015 (Flow)
PROFIBUS PA, PDM Version: 6.0 SP5, 6.1, 8.0, 8.1, 8.2, 8.2 SP 1
Electronic Data Description (EDD)1.12.00Language neutral -
EDD Library, PDM_DP_Flow_Package_V_1_12_00, 30.07.2015 (Flow)
PROFIBUS DP, PDM Version: 6.0 SP5, 6.1, 8.0, 8.1, 8.1 SP 1, 8.2, 8.2 SP 1
Electronic Data Description (EDD)1.12.00Language neutral -
DTM Single, Promag_33_35_DP_V2_06_00, 30.11.2017 (Flow, Promag, 0x1511)
PROFIBUS DP, DeviceCare Version: 1.04.00 FieldCare Version: 2.12.00
Device Type Manager (DTM)1.5.153.348Language neutral -
DTM Single, Promag_33_35_PA_V2_05_00, 30.11.2017 (Flow, Promag, 0x1505b)
PROFIBUS PA, DeviceCare Version: 1.04.00 FieldCare Version: 2.12.00
Device Type Manager (DTM)1.5.153.348Language neutral -
DTM Single, Promag_33_35_PA_V2_06_00, 30.11.2017 (Flow, Promag, 0x1505b)
PROFIBUS PA, DeviceCare Version: 1.04.00 FieldCare Version: 2.12.00
Device Type Manager (DTM)1.5.153.348Language neutral -
DTM Single, Promag_35_S_V2_04_00, 30.11.2017 (Flow, Promag, 0x0036)
HART, DeviceCare Version: 1.04.00 FieldCare Version: 2.12.00
Device Type Manager (DTM)1.4.188.39Language neutral -
Promag 35
Product Code: 35S- Declaration Number: ID3_2
EU DeclarationTiếng Đức , Tiếng Anh , fr -
Promag 53, Promag 50, Promag 35, Promag 23, Promag 10
Product Code: 50W-, 53P-, 53W-, 53H-, 50P-, 50H-, 10P-, 10H-, 10W-, 23H-, 35S-, 23P- Region/Country: Poland
Pressure EquipmentTiếng Anh , Người Ba Lan
-
Sản phẩm mới
