Capacitance
Point level detection
Minicap FTC262

Minicap FTC262 plastic housing ©Endress+Hauser
Minicap FTC262 aluminium housing ©Endress+Hauser
Minicap FTC262 application ©Endress+Hauser

Designed for light bulk solids

Minicap FTC262 is a simple and cost-effective rope probe for point level detection in bulk solids, particularly suited to applications involving aggressive media and heavy build-up. It is designed for point level detection of light bulk solids, e.g. grain products, flour, milk powder, animal feed, cement, chalk or gypsum.

Lựa chọn nhanh

Chọn trong số các tùy chọn do chúng tôi đề xuất
  • <%label%>
  • <%feature%>
  • Process Connection
  • <%message%>

hoặc

Cấu hình riêng

Tiếp tục lựa chọn từ tất cả các tùy chọn có thể
  • Lợi ích

    • Simple mounting and commissioning without calibration

    • Mechanical safety, cost-efficiency and long operating life due to no wearing parts

    • High operational safety and reliability due to active build-up compensation

    • Optimized storage by simply shortening the...

  • Phạm vi ứng dụng

    For point level detection of light bulk solids, with a grain size up to max. 30mm and a dielectric constant εr ≥ 1.6.
    Typical applications: Grain products, flour, milk powder, animal feed, cement, chalk or gypsum.

    • Process connection: Threads

    • ...

Tín năng và thông số kỹ thuật

Quay lại

Details

  • Measuring principle

    Capacitive Solid

  • Characteristic / Application

    No calibration on start-up
    Active build-up compensation
    Mechanically robust
    The rope probe can be shortened
    (optimum matching to the measuring point)

  • Specialities

    Rope shortening parts to be supplied by the customer

  • Supply / Communication

    10,8 ... 45V DC, DC-PNP 3-wire
    20 ... 253V AC, or
    20 ... 55V DC, Relay output

  • Ambient temperature

    -40 °C ... 80 °C(-40 °F ... 176 °F)

  • Process temperature

    -40 °C ... 80 °C
    (-40 °F ... 176 °F)

  • Process pressure absolute / max. overpressure limit

    -1 ... 6 bar(-14.5 ... 90 psi)

  • Main wetted parts

    PPS = Polyphenylene sulphide
    (glass fibre content approx. 40%)

  • Max. tensile strength

    3000 N

  • Process connection

    R 1 1/2
    NPT 1 1/2

  • Sensor length

    min. 500 mm (20"), max 6000 mm (236")

  • Communication

    PNP transistor output
    Relay output (potential-free
    change-over contact / SPDT)

  • Certificates / Approvals

    ATEX , FM, CSA, NEPSI, EAC

  • Options

    Aluminium Housing

  • Application limits

    Solids, grain size max. 30 mm (1.2"),
    DK min 1,5
    Flexural strength 1400 N (at probe tip)

Tài liệu / Tài liệu hướng dẫn / Phần mềm

Phụ kiện / Phụ tùng thay thế

Nr
Order code
Specification
  • Sản phẩm cũ

Vui lòng chọn thị trường / khu vực của bạn