Servo tank gauging instrument
Proservo NMS80
High precision servo measurement for liquid level, interface and density
The intelligent tank gauge Proservo NMS80 is designed for high accuracy liquid level measurement in custody transfer and inventory control applications with NMi- and PTB-approvals. It meets the relevant requirements according to OIML R85 and API 3.1B. It fulfills the exact demands of tank inventory management and loss control and is optimized in regards of total cost saving and safe operation.
Lợi ích
Hardware and software developed according to IEC 61508 up to SIL3 (in homogeneous redundancy) for high level of safety
Maximum reliability through accuracy up to ±0.4mm (±0.02")
Developed according to international metrology recommendations such as OIML R85 and API MPMS
Local and country-specific certifications like NMi or PTB for custody transfer applications
Simplified installation and trouble-free operations due to easy connection to major DCS systems via open protocols
Measurement of interfaces between up to three liquid layers, tank bottom, spot, and profile densities
Phạm vi ứng dụng
For high accuracy custody transfer measurement in crude oil, gasoline, diesel, petrochemicals and chemicals.
Process connections: Flanges
Temperature: -200 to +200°C (-328 to +392°F)
Pressure: 0 to +6bar (0 to +87psi)
Maximum measuring range: 36m (118ft)
Accuracy: ±0.4mm (±0.02")
International explosion protection and custody transfer certificates, overfill prevention WHG, SIL
Tín năng và thông số kỹ thuật
Tài liệu / Tài liệu hướng dẫn / Phần mềm
Phụ kiện / Phụ tùng thay thế
Sản phẩm cũ / sản phẩm mới
Người tiền nhiệm: Proservo NMS5
