Flow assembly
Flowfit CPA240

Flowfit CPA240 - Flow assembly for high temperatures and pressures ©Endress+Hauser

Durable assembly for the chemical, petrochemical, and power industries

The Flowfit CPA240 flow assembly is designed for all demanding applications where high temperatures and pressures are involved. With its various connections, Flowfit flexibly adapts to your process offering space for three sensors. Simple installation and removal of the sensors save time for maintenance and recalibration.

  • Lợi ích

    • Simple installation and removal of the electrode holder (e.g. for calibration)

    • Flexible connection to the process by means of various connectors and installation versions

    • Less condensation due to a Goretex filter

    • Reduces installation effort by providing...

  • Phạm vi ứng dụng

    Flowfit CPA240 is intended to be used in pipes in:

    • Chemical industry

    • Petrochemical industry

    • Power plants and waste incinerating plants

    • Extractive metallurgy and metal processing

    • Drinking water treatment plants

    It is suitable for use with pressures of...

Tín năng và thông số kỹ thuật

Quay lại

Details

  • Measuring principle

    Glass electrode

  • Application

    Drinking water treatment plants, boiler feedwater and ultra-pure water plants, cooling-water circuits, fertiliser production, sugar production, gas scrubbers, petrochemical plants

  • Installation

    Flow assembly

  • Characteristic

    Piping, bypass

  • Design

    3 electrode installation locations, 120mm electrodes, flow direction horizontal or from the bottom, thread connection G1/2" for spray cleaning

  • Material

    Flow vessel: PVDF or stainless steel 1.4404
    O-rings: EPDM, Viton, Chemraz or Fluoraz

  • Process temperature

    PVDF version: 0 to 120 °C (32 to 248 °F)
    Stainless steel version: -15 to 150 °C (5 to 302 °F)
    With EPDM: -15 to 140 °C (5 to 284 °F)

  • Process pressure

    PVDF version: max. 8 bar at 50 °C (max. 116 psi at 122 °F)
    Stainless steel version: max. 10 bar (max. 145 psi)

  • Connection

    Pressurized flange DN25/PN16, ASME 1" lbs 150, JIS 10K25A

  • Additional certifications

    Material certification 3.1.B EN 10204

  • Measuring principle

    Sensor ORP / Redox

  • Application

    Drinking water treatment plants, boiler feedwater and ultra-pure water plants, cooling-water circuits, fertiliser production, sugar production, gas scrubbers, petrochemical plants

  • Installation

    Flow through holder

  • Characteristic

    Piping, bypass

  • Design

    3 electrode installation locations, 120mm electrodes, flow direction horizontal or from the bottom, thread connection G1/2" for spray cleaning

  • Material

    Flow vessel: PVDF or stainless steel 1.4404
    O-rings: EPDM, Viton, Chemraz or Fluoraz

  • Process temperature

    PVDF version: 0 to 120 °C (32 to 248 °F)
    Stainless steel version: -15 to 150 °C (5 to 302 °F)
    With EPDM: -15 to 140 °C (5 to 284 °F)

  • Process pressure

    PVDF version: max. 8 bar at 50 °C (max. 116 psi at 122 °F)
    Stainless steel version: max. 10 bar (max. 145 psi)

  • Connection

    Pressurized flange DN25/PN16, ASME 1" lbs 150, JIS 10K25A

  • Additional certifications

    Material certification 3.1.B EN 10204

Tài liệu / Tài liệu hướng dẫn / Phần mềm

  • Technical Information CPA 240

    pH flow assembly for demanding processes with high requirements.
    Sensor holder with three electrode mounting positions

    Technical Information (TI)
  • Flowfit CPA240 Operating Instructions

    Flow assembly for pH or ORP sensors

    Operating Instruction (BA)
  • pH 測定セレクションガイド

    産業プロセスにおける pH 測定

    Competence Brochure (CP)
    08/15
    Tiếng Nhật
  • CP00010C pH measurement in industrial processes for US market

    Selection and engineering guide for your industry and application

    Competence Brochure (CP)
    04/15
    Tiếng Anh
  • Measurement and control aspect of pH using inductively coupled with bidirectional Memosens technology in flue gas desulfurization process

    White Paper CP971C pH measurement and control in a power utility is an
    integral part of process. The scrubber efficiency is highlydependent on
    the pH. Numerous opportunities were revealed for saving time, as well as
    the cost and materials in power plants. In afossil fuel power plant,
    the
    chemical energy stored in coal, oil, natural gas, shale oil, oxygen and
    air
    is converted into thermal, mechanical and finally into electrical
    energy. In
    other words, water is heated to steam, which spins a steam turbine. The
    steam turbine drives an electrical generator.

    Competence Brochure (CP)
    04/11
    Tiếng Anh
  • CP01202C pH Sensors:Calibrate, clean, perform a calibration check or...?

    This white paper will address
    Knowing when to do a pH sensor calibration versus a calibration
    check
    How to properly clean a pH sensor
    How to perform a pH sensor calibration
    A decision tree for step by step guidance

    Competence Brochure (CP)
    02/12
    Tiếng Anh
  • Flowfit CPA240

    Durchflussarmatur
    Bis zu drei Elektrodeneinbauplätzen für pH-/Redox-Sensoren bzw. für den
    Einbau in
    Rohrleitungen „Bypass“ oder „Inline

    Tender Text
    06/16
    Tiếng Đức
  • FlowFit P

    Product Code: CPA240-
    Declaration Number: HE_01118_01.19
    Manufacturer Specification: PED

    Manufacturer Declaration
    Tiếng Đức , Tiếng Anh
  • FlowFit P

    Product Code: CPA240-
    Declaration Number: HE_01119_01.19
    Manufacturer Specification: PED

    Manufacturer Declaration
    Tiếng Đức , Tiếng Anh

Phụ kiện / Phụ tùng thay thế

Nr
Order code
Specification

Câu chuyện thành công

Trang web này sử dụng cookie. Để tiếp tục duyệt trang web, bạn sẽ đồng ý các điều khoản sử dụng cookie. Tìm hiểu thêm tại đây

So sánh các sản phẩm

Vui lòng chọn thị trường / khu vực của bạn

Đi đến thị trường / khu vực được chọn